Computer Shopper 121/Computer Shopper 121/Computer Shopper 121.iso/HomeBus/Turbocad/TCW.Z/mdc.bas

BASIC Source File | 1997-05-05 | 10.0 KB | 445 lines

'******************************************************************
'*                                                                *
'*                      TurboCAD for Windows                      *
'*                   Copyright (c) 1993 - 1996                    *
'*             International Microcomputer Software, Inc.         *
'*                            (IMSI)                              *
'*                      All rights reserved.                      *
'*                                                                *
'******************************************************************
'
' Filename: MDC.BAS (Multiple Drawing Converter 2.0 Beta)
'
' Author:    Pat Garner
'
' Date:        1/8/97
'
'
' Scriptname:    Multiple Drawing Converter
'
' Version:        2.0 Beta
'
' Changes:        Moved All Script options from
'                input boxes to a 'UI' dialog.
'
'
' Description:    Script asks for a directory and filetype
'                sufix, and then creates a list of files
'                of the specified filetype from the specified
'                directory and then attempts to sequentially
'                load, save, and close all files in the list.
'                You also have the option to print files both
'                before and after conversion as well as exit
'                the application upon script completion.
'
'
' TurboCAD (TCADAPI) Functions used in this script:
'
'    - TCWAppExit
'    - TCWLastErrorGet
'    - TCWDrawingNew
'    - TCWDrawingOpen
'    - TCWDrawingClose
'    - TCWDrawingSaveAs
'    - TCWDrawingPrint
'
'
' TODO:
'        - Convert subroutines to new comment style
'        - Optimize and clean up subroutinesj
'        - Convert textboxes to drop down list boxes
'        -
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''




''Script Global Access Variables'''''''''''''''''''''''''''''''
'
'
Dim dir                    As String
Dim ext                    As String
'
Dim newdir                As String
Dim newext                As String
'
Dim Printd                As Integer
Dim BAB                    As Integer
'
Dim ExitApp                As Integer
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''




''Script Global Constants''''''''''''''''''''''''''''''''''''''
'
'
Global Const BEFORE        = 0
Global Const AFTER         = 1
Global Const BOTH        = 2
'
Global Const NO            = 0
Global Const YES        = 1
'
'
' Set to 1 to exit after UI dialog, or 2 to exit after
'  one iteration of file loop
'
Global Const DEBUG_MODE            = 0
'
'
' * Set this value to 0 to show print dialog in file loop
'
Global Const SHOW_PRINT_DIALOG    = 1
'
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''




''SUBROUTINE: MAIN'''''''''''''''''''''''''''''''''''''''''''''
'
' * Parameters: None
' *
' *
' * Return Value: None
' *
' *
' * Description:
' *
' *        Main is the conductor of the program
' *         and like a music conductor, tells
' *         the other parts of the program when
' *         it's time to do their thing.
' *
' *
Sub main()

    ' * File manipulation variable declarations
    Dim pos                    As Integer
    Dim filename            As String
    Dim newfilenameplusdir    As String
    Dim filenameplusdir        As String


    UIDialog


    ' * Create a batch file that will compile our file list for us
    open "c:\filelist.bat" for output as #1

        print # 1, "@echo off"
        print # 1, "dir /b " & dir & "\" & "*." & ext & " >c:\filelist.txt"

    close


    ' * Run batch file to create the file list
    Shell "command.com /c c:\filelist.bat", 2


    'Pause for a second or three
    for i#=0 To 1000000
    next i


    ' * Open our filelist file for reading
    open "c:\filelist.txt" for input as #1

        ' * Start the file loop and keep iterating until
        ' *  you've reached the end of the file.
        do while not EOF(1)


            ' * Read in a file name
            line input #1, filename


            ' * Find out where the extension starts in the filename
            pos = InStr(1,filename, ".")


            ' * Append the filename onto the end of the
            ' *  directory we wish to load files from.
            filenameplusdir = dir & "\" & Left$(filename, pos+3)


            ' * Open the current drawing
            TCWDrawingOpen filenameplusdir


            ' * If the user answered yes to print,
            ' *  check to see if the user wishes to
            ' *  print before conversion...
            if Printd = YES then

                if BAB = BEFORE OR BAB = BOTH then

                    ' * Print the drawing
                    TCWDrawingPrint SHOW_PRINT_DIALOG ' * NOTE: PrinDialog contains a value,
                                                ' *  which instructs TCWDrawingPrint
                                                ' *  to show the print dialog or not.
                end if

            end if


            ' * Create new filename containing the
            ' *  original filename plus the new
            ' *  extension.
            filename = Left$(filename, pos) & newext


            ' * Append the newfilename onto the
            ' *  directory the user wishes to save
            ' *  the converted files to
            newfilenameplusdir = newdir & "\" & filename


            ' * Save the current drawing with our
            ' *  new filename to the directory
            ' *  originally specified by the user.
            TCWDrawingSaveAs newfilenameplusdir, FALSE


            ' * If the user answered yes to print check to see
            ' * if the user wishes to print after conversion...
            if Printd = YES then

                if BAB = AFTER OR BAB = BOTH then

                    ' * Print the drawing
                    TCWDrawingPrint SHOW_PRINT_DIALOG ' * NOTE: PrinDialog contains a value,
                                                ' *  which instructs TCWDrawingPrint
                                                ' *  to show the print dialog or not.
                end if

            end if


            ' * Close the currently open drawing
            TCWDrawingClose



            if DEBUG_MODE = 2 then                    ' * If Debug has been set to 1,

                MsgBox "DEBUG STOP: File Loop"        ' *  Display a message box telling
                                                    ' *  us this, and the, ...

                END                                    ' *  stop script execution before
                                                    ' *  loop iterates again.

            end if


        loop                ' * Iterate loop

    close #1                ' * Close filelist filestream


    RemoveExternalFiles
    ExitScript

End Sub
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''




''SUBROUTINE: RemoveExternalFiles''''''''''''''''''''''''''''''
'
' * Parameters: None
' *
' *
' * Return Value: None
' *
' *
' * Description:
' *
' *        Removes special files created by this script
' *         for it's own use.
' *
' *
Sub RemoveExternalFiles ()

    Shell "command.com /c del c:\filelist.bat", 6    ' * Delete our filelist
                                                    ' *  creation batch file

    Shell "command.com /c del c:\filelist.txt", 6    ' * Delete our filelist file

End Sub
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''




''SUBROUTINE: ExitScript'''''''''''''''''''''''''''''''''''''''
'
' * Parameters: None
' *
' *
' * Return Value: None
' *
' *
' * Description:
' *
' *        Exit TurboCAD upon completion
' *         of script if user turned option
' *         from UI dialog.
' *
' *
Sub ExitScript ()

    ' * If the user elected to exit the app after script completion, ...
    if ExitApp = YES then


        ' * Display a message box telling us this ... *
        MsgBox "Finished converting files!" & Chr$(10) & "Now Exiting Application!"


        ' * And exit the application.
        TCWAppExit


    else


        ' * Otherwise, let the user know
        ' *  the script is done with the
        ' *  file conversion
        MsgBox "Finished converting files!"


    end if

End Sub
'
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''





''SUBROUTINE: UIDialog''''''''''''''''''''''''''''''''''''''''''
'
' * Parameters: None
' *
' *
' * Return Value: None
' *
' *
' * Description:
' *
' *        This is the script's user interface subroutine.
' *         It's actually a dialog box definition that serves
' *         as a "template" for later creating a variable of
' *         of this type and them using the enable function
' *        'Dialog' to display it and return values.  The
' *         dialog definition is done in a manner very similar
' *         to creating user defined variables with the type
' *         function in basic or the struct function in C.
' *         By utilizing several of the UI objects available
' *         you can actually create quite a useful interface
' *         for setting script values and options as well as
' *         guiding the user through script setup with a
' *         "wizard" like interface.
' *
' *
Sub UIDialog ()

    Begin Dialog FernUI 60, 60, 240, 185, "Multiple Drawing Converter"

        Text        10, 10, 150, 10,    "Directory you wish to open from:"
        TextBox        120, 10, 110, 10,    .OpenDir

        Text        10, 20, 150, 10,    "Extension of files load:"
        TextBox        120, 20, 110, 10,    .OpenType

        Text        10, 30, 150, 10,    "Directory you wish to save to:"
        TextBox        120, 30, 110, 10,    .SaveDir

        Text        10, 40, 150, 10,    "Extention to save to:"
        TextBox        120, 40, 110, 10,    .SaveType

        CheckBox    10, 60, 150, 10,    "Exit TurboCAD upon script completion", .ExitTCW

        CheckBox    10, 70, 100, 20,    "Print drawings", .Print

        GroupBox    10, 90, 130, 40,    "Print Before conversion, after, or both?", .PrintBeforeAfterOrBoth

        OptionGroup .WhenToPrint

            OptionButton 20, 100, 30, 8,    "Before",    .Before
            OptionButton 20, 110, 30, 8,    "After",    .After
            OptionButton 20, 120, 30, 8,    "Both",        .Both


        OKbutton     80, 170, 40, 12
        CancelButton 120, 170, 40, 12

    End Dialog


    Dim Dlg1 As FernUI

        Dlg1.OpenDir    = "c:\imsi\tcw30\drawings"
        Dlg1.OpenType    = "tcw"

        Dlg1.SaveDir    = "c:\imsi\tcw30\drawings"
        Dlg1.SaveType    = "tcw"

        Dlg1.Print        = 0
        Dlg1.ExitTCW    = 0


    button = Dialog(Dlg1)


    if button = 0 then

        END

    elseif button = -1 then

        dir        = Dlg1.OpenDir
        ext        = Dlg1.OpenType

        newdir    = Dlg1.SaveDir
        newext    = Dlg1.SaveType

        Printd    = Dlg1.Print
        BAB        = Dlg1.WhenToPrint

        ExitApp = Dlg1.ExitTCW


        if DEBUG_MODE = 1 then

            MsgBox    "dir: "        & dir        & Chr$(10) & _
                    "ext: "        & ext        & Chr$(10) & _
                    Chr$(10)    & _
                    "newdir: "    & newdir    & Chr$(10) & _
                    "newext: "    & newext    & Chr$(10) & _
                    Chr$(10)    & _
                    "Printd: "    & Printd    & Chr$(10) & _
                    "BAB: "        & BAB        & Chr$(10) & _
                    Chr$(10)    & _
                    "ExitApp: " & ExitApp

            END

        end if


    end if

End Sub